Add to Favorites
Your company account is blocked and you cannot place orders. If you have questions, please contact your company administrator.

Fasteners for Concrete

Fasteners for Concrete

Overview
  • A screw that cuts threads in the wall of a 5/32'' hole pre-drilled in concrete.
  • Gives positive fastening in ceilings and walls.
  • Can be unscrewed and re-inserted.
  • Saves time, requires a smaller hole than plugs.
  • Can be used in concrete, brick, mortar, stone and block.
  • Because these screws cut a thread in the masonry instead of employing pressure, there is less danger of breaking the concrete when you are near the edge of the window opening.
  • Screws are available with slotted hex washer head and Phillips head.
  • Thread diameter is 3/16''.
  • Drill Bits are sold separately.
  • In determining screw length, 1'' to 1 1/4'' of the screw must sit in the masonry and a hammer drill or rotary hammer drill must be used.
  • Use concrete screws with hammer drill kits SKU CC10 & SKU CC11.

 

Recently Viewed